Showing posts with label Beal Gear. Show all posts
Showing posts with label Beal Gear. Show all posts

6/26/2017

Gearing Up for Alaska


Grivel and Beal athlete Alan Rousseau shares his thoughts on the gear necessary for a successful climbing trip to Alaska.

This spring over the course of seven weeks I did three trips into the Alaska Range.  Two of these trips I was working as a mountain guide, and one was a personal trip.  Starting in mid April I guided the Ham and Eggs route on the Moose’s Tooth in the Ruth Gorge.  Late April I had a second client for another trip up Ham and Eggs followed by an ascent of the SW ridge of peak 11,300 (a mountain named by its elevation located in the West Fork of the Ruth Gorge).  


A look up the Moonflower


In May I met a friend of mine from Salt Lake and we made several attempts on the North buttress of Mount Hunter.  With this much climbing planned on a diversity of objectives my gear quiver was quite extensive.  For which I am thankful for Liberty Mountain’s support.  The focus of the following article will be on equipment I used for these various objectives and why they are suited well for climbing in the Alaska Range.  

Scoping the Mooses Tooth

Mid April in Alaska can be a pretty cold time, however, with spring arriving earlier and earlier I advised my clients that although it can be cold; it’s better to be cold on an ice climb than show up and have it melted out! I used warm double boots for all my trips into the range this year.  The boots I used fit well to both the Grivel G20 and G22 crampons.  For the Moose’s Tooth and Peak 11,300 I used the G22 crampon.  For long moderate routes the dual front-point reduces calf and ankle fatigue while providing a more solid platform.  


Rapelling Ham and Eggs

The North Machines made for an excellent ice tool on “Ham and Eggs” and Peak 11,300.  The swing weight is spot on, and the pick angle works really well on the lower angle ice (60-75 degrees) encountered on both of these routes.  The Hammer and adze are also both the “real deal”. There has been a trend lately with tools to make the adze and hammer smaller and smaller.  I feel on most tools out there the hammer is too small to actually place a piton or picket, and the adze is not large enough to really move some snow or chop a good bollard.  For big alpine routes it’s a huge advantage to not have to carry an actual wall hammer to place a solid piton.  Grivel tools are the only ones I feel like I can actually hammer with. 

Sorting ropes on Peak 11,300

Using ropes as insulation

When it comes to ropes there are endless options for routes like these, all have their merits.  For the Moose’s tooth, I used two, Beal Gullys (7.3mmx70m).  They are super light weight, and ultra water resistant.  It is important to have two ropes for the descent, and I feel fine about going with such a thin line since there is little rock encountered on the route and therefore few sharp edges.  Most of the pitches are full rope lengths on this route so it’s nice to have less rope weight.  For the SW ridge of 11,300 I opted to carry a Beal Gully on my back and for simplicity of handling the rope I used a single Beal Opera (8.5mm).  Guiding a route like the SW ridge the rope technique is changed often from long pitches, to simul climbing, to short roping, and short pitching.  Being able to have one rope instead of two can shave hours off your time at the end of guiding a big route.  For the descent it was nice to have a light twin rope to use on the rappels.  Some people prefer to use a 6mm cord for a tag line rappelling, however in cold windy places I find the 6mm tangles up a bit too much.  Although the 7.3 Gully is a little heavier it tangles less, and if a rope gets stuck it’s nice to know both ropes in your system are designed to take falls (should you have to lead up to retrieve a stuck line). 


Bollard on Ham and Eggs

Cornice at the top of peak 11,300

For the North buttress of Hunter, which has more difficult technical climbing a “sendier” set up is nice.  I changed my tools up to the Tech Machines, which was nice to have a solid match point for the harder mixed sections.  The tool’s pick angle is designed more for vertical to overhanging terrain.  The G20 crampon was my choice for this objective.  This lightweight crampon helps reduce fatigue, and using a mono point in rock terrain is much more comfortable for me.  A mono point allows the climber to pivot ones foot on small edges without levering off the hold.  I was happy to have it while freeing the Prow pitch, which used to have an A2 rating, and is now generally referred to as M7-.  


Moonflower pitch 9

For the Moonflower our rope set up also changed to a Beal joker (9.1mm) and a Beal gully.  For the harder pitches and pendulums on the route I prefer to have a rope over 9mm.  The last thing I want to be thinking about in the crux is if my rope is on a sharp edge.  I like climbing on skinny ropes, but there is a time and place for it.  Ask yourself what benefits you will gain by using a real skinny cord, and see if any apply to the climb you have at hand.  If its likely the leader or second will fall in rock terrain, or if jugging lines is a possibility think hard about if the skinniest rope is the right choice. 


The pieces of gear that I used for all of these objectives were the Grivel Stealth helmet, Grivel Sigma K8g and plume twin gate carabiners, Beal Mirage Harness, Cypher mydas draws and dyneema slings, and a Cilo Gear 34B pack.  The stealth helmet is super light and surprisingly durable.  The adjustment systems are simple and unlike most helmets with a “turn knob adjustment” the stealth’s adjustments will not freeze on you.  The Grivel twin gate carabiners have been a game changer for me, especially in cold environments.  I was so tired of having lockers freeze on me I began belaying with non-lockers on big cold alpine routes.  These twin gates have little surface area to freeze and once you get the hang of them they are easy to operate one handed with gloves on.  


Bivy on the descent of Peak 11,300

The Beal Mirage harness packs small, is lightweight, and has enough surface area to help keep circulation to your legs.  Weight savings is key with all the gear you have to bring up on these routes, the cypher mydas carabiners helped out a lot in this department.  I used four mydas sport draws and 6 mydas alpine draws with dyneema slings on the moonflower.  The last piece of gear I‘ll talk about is the Cilo gear 34B pack.  This bag has been with me for several years, hundreds of days of use, and the dyneema keeps on givin’ er.  It is small enough to still climb well, but if you go light you can fit a few days of kit in it.  Check out Cilo gear’s line of packs all handmade in the USA.


Cook tent at the base of Mooses Tooth

Ham and Eggs

I hope this has been helpful to see what equipment allows me to work and climb personal objectives in Alaska.  Now it’s time to pack for the next two months of guiding in the Alps, immediately followed by a personal climbing expedition on the India Pakistan border supported by the Mugs Stump Grant.  See you in October North America!     

-Alan Rousseau





_________

Like what you read? Share it with a friend.

11/16/2016

Ice Climbing in the Beartooths: November 2016

Alan Rousseau at the belay of Pitch 5 of Ice Dragons.
The Fall of 2016 will go in the books as one of the warmest and driest on record for the intermountain west.  Which for some user groups has been preferable:  Mountain bikers, rock climbers, and trail runners have been shocked about the ability to still get up high and find dry conditions into mid-November.  It has, however, left the ice climbing community pouring over photos, forums, and searching long range forecasts for somewhere within a days drive that has below freezing temps.  Around the Salt Lake area one climber, Nathan Smith, is more vigilant than the rest.  When I got a message from Nathan suggesting heading to the Beartooth’s (a remote range in Montana) to climb an ice line, of course I was interested. 
East Rosebud Lake. The trail starts on the left-hand side of the photo and winds it’s way up to the ice line on the far left.

The Beartooth range is one that is generally kept quiet, people seem to keep information close to the chest.  I had heard of it as this kind of mystical place, reserved for the hard, with flurries of development of long routes in rugged terrain.  Which of course added to the appeal, but makes finding information regarding our planned route, Ice Dragons, not all that easy.  Fortunately, Nathan spoke to someone that had recently climbed the route.  However, we still had a wide range of ambiguity regarding technical difficulty.  One guidebook suggested a grade of M6 WI4, while one trip report suggested WI3, lengths of the climb also varied from 1,000’ to 1,500’.  Either way we were interested in climbing something frozen so we packed up the car and started the nine-hour drive to the East Rosebud Trailhead.  Arriving with a couple hours of light we caught a view of Ice Dragons:  A stunning ribbon of ice splitting the large north face, which forms the shoulder of Mount Inabit.  Our binoculars confirmed that the line was very much in.  


Alan in the “five-mile basin” nearing the cirque holding Ice Dragons.

We began to read through approach information, and found two viable options.  The first was less distance overall, but more mileage through unstable scree and talus fields.  We opted for a second option that had a bit more mileage but less off-trail time.  After plotting some waypoints into our maps we set off into grizzly country at 4 am, hoping our big four legged friends were deep in a winter slumber already.  The first six miles of trail flew by in under two hours.  We found ourselves under a large rock face known as “the Bears Face” from here we located a deep slot, filled with loose rock where we would gain 1300’ of elevation.  It was classic one-step-forward-two-steps-back terrain, and was pretty time consuming.  Eventually we popped out on the pleasant treed shoulder of Inabit and then dropped down and contoured into the talus filled “five-mile basin” where Ice Dragons can be found.
Navigating the talus leading up to Ice Dragons, the largest ice flow in the center of the photo.

We arrived at the foot of the route in five hours.  We were told that the ice would get fatter and fatter with an Indian summer, but were still surprised at how much ice was there compared to conditions the first ascent party found.  Instead of looking at a pitch of primarily rock, we were looking at a pitch of WI3 with maybe a move or two on the rock.  
Alan Rousseau on the first pitch of Ice Dragons.

The climb for us was mostly rambling WI3 and all pitches were around 60 meters in length.  The ice was in great condition, not quite plastic but the majority was one hit sticks.  The position and nature of the climb, up the obvious weakness in the wall, gave it a distinctly alpine feel.  After 1,300’ of climbing we hit the plateau of Mount Inabit.  We rappelled back down the route building two rock anchors and the rest were v-threads. 
Alan Rousseau on the third pitch of Ice Dragons.

Looking back just a few miles to summer conditions lower on the trail.
Nathan Smith on the fourth pitch of Ice Dragons

Alan at the top of the ice climbing. 300’ of snow and mixed lead to the plateau from here.

Alan punching his way up.

For the descent we decided to take the more direct option that involved more off trail time.  It also involved some undesirable scree fields but was not nearly as steep as the notch we climbed through that morning.  The descent took around 3 hours from “five mile basin” to the car.  We arrived at the car at 5:30 pm and had to turn on headlamps as we sorted through gear.  Just as soon as we arrived we loaded up the car and started the long drive back to Salt Lake.  Nathan took the helm all the way back, arriving back at in the city at 3:30 AM the same time our alarms sounded 24 hours earlier.  The stats were 18 hours of driving, over 18 miles of walking, 5,300’ of elevation gain, 1,300’ of ice climbing, 45 and half hours Salt Lake to Salt Lake, and two climbers stoked for winter to show up in their backyard. 

Alan hiking out after a fun day in the Beartooths.

Thanks to Nathan for motivating, the Beartooth’s for being rad, and as always to Liberty Mountain for the continuing support.
-Alan Rousseau

7/28/2016

Gear Review: Beal Booster 9.7mm


The Beal Booster 9.7mm rope recently received some love from UKClimbing.com. In their review of the rope, the British review site called the rope "easy to flake," "resistant to kinking," "an extremely hard wearing rope that will take a lot of punishment," and "a sport climbing workhorse."

The Booster is part of Beal's Mountain Line of ropes that features dry treated cords for all-mountain applications. The rope excels as a sport climbing rope, but performs just as well in trad or alpine climbing. This rope weighs in at only 63 g/m, has a low impact force of 7.3 kn, and is rated to 9 UIAA falls. 

To read the full review of the Booster 9.7mm, take a look at the UKC site

9/03/2014

New Beal Rope is the Thinnest and Lightest Single-Rope


An exciting moment during the 2014 Outdoor Retailer Summer Market trade show was the unveiling of Beal's new Spring/Summer 2015 climbing gear that included the lightest and thinnest triple-rated climbing rope...the Beal OPERA 8.5mm Unicore.

7/30/2014

Sleek and Comfortable Climbing Harnesses


Climbing Magazine announced that the new Beal Rebel harness is one of the five most comfortable all-around harnesses…“Best Seats in the House.”


4/09/2014

The Lightest and Thinnest Half-Rope: Beal Gully 7.3mm


The new Beal Gully 7.3mm Unicore climbing rope was featured in Climbing Magazine’s 2014 Gear Guide. The lightest and thinnest half rope on the market, the Gully is also certified as a twin rope.

3/17/2014

11/05/2013

Beal Tiger 10mm Unicore Featured in Backpacker Magazine

Backpacker Magazine featured the Beal Tiger 10mm Unicore dynamic climbing rope in their Fall/Winter 2013 Gear Guide.

10/25/2013

Beal Aviator In Climbing Magazine

The Beal Aviator was featured in the September 2013 issue of Climbing Magazine and on Climbing.com.

Climbing Magazine labeled the Beal Aviator 10.2mm as the "Burly Workhorse."

"A solid workshorse rope for traddies, sportsters, and topropers. who are less concerned with weight. Trust this rope in every situation and know it won't have any kinking or fuzzing issues for a long time."

10/16/2013

A 2014 Sneak Peek: Beal Ropes, Harnesses, and Carabiners

What is a climber’s biggest fear? Climbers are scared of being unsuccessful and injured. In other words, climbers are afraid of falling.

Now that projecting is a norm in the climbing world, people are falling more and more as they try to raise their personal abilities on rock and ice. For this reason, it is imperative that climbing gear provides a soft/dynamic catch while also ensuring the safety of the climber. Falling while climbing is almost inevitable. So why not have the gear that will help take the “edge” off?

Beal, known as "The Dynamic Company," focuses on manufacturing gear that keeps climbers safe and comfortable. With perfected security and dynamic properties, Beal’s collection of dynamic climbing ropes provide climbers with peace-of-mind, even when they are sketched out and dynoing to a sloper.

7/12/2013

Beal Gully 7.3mm Awarded For Lightweight and Safety Features

The new Beal Gully 7.3mm won the Gold OutDoor Industry Award 2013 at the OutDoor Show in Germany. The Beal Gully was one of 11 products to receive this prestigious award.

The honor of this award comes directly from the mouth of the judges, “The Beal Gully double rope is a great product: although it has a small diameter, it is ideally suited for use as a high rope and offers climbers a maximum degree of safety.”

Continue Reading...


2/13/2013

The 2013 Beal UNICORE Ropes

For 2013, Beal is adding five more ropes to its line of UNICORE ropes making a total of 13 UNICORE ropes. From a diameter of 7mm and up to 11mm, there is now a UNICORE rope for every type of climbing.

New to the UNICORE ranks is the Ice Line 8.1mm, Cobra 8.6 mm, Joker 9.1mm, Tiger 10mm, and Top Gun 10.5mm. For over a year now, the Diablo 9.8mm, Diablo 10.2mm, Wall School 10.2mm, Wall Master 10.5mm, Access 10.5 & 11mm, Baobab 13.5mm, and Spelenium 8.5mm have astonished the masses with its UNICORE properties that ramps up the ropes’ safety and performance.

Advantages of UNICORE:
On a classic rope, if the sheath is accidentally severed, it slides and bunches over several meters. It then becomes impossible to pass this zone, whether climbing or descending.

With UNICORE, the sheath stays in place and the user may escape, either by climbing or by descending, whilst taking all necessary precautions. You are not stuck on the rope with no way out!

The Real Truth About UNICORE


With Beal’s introduction of a new line of dynamic climbing ropes that feature UNICORE, climbers now have a safer option to consider when purchasing a rope. UNICORE permanently bonds a rope’s sheath to its core, eliminating sheath slippage, allowing a climber to escape off the rope if the sheath has been cut, reduces rope shrinkage, and allows for the temporary cutting of a rope without the sheath fraying.


12/03/2012

Beal Joker Rope Ad in Dead Point Magazine



The Dec 2012 issue of Dead Point Magazine is online and toting our Beal Joker 9.1mm UNICORE ad. Fits perfectly with the 11-page feature on Adam Ondra.

7/18/2012

UNICORE - Beal's "Special Ingredient"



We have some exciting news and we just can't wait to tell you all about it.


Imagine yourself rock climbing. You're seconding up a route that you partner just finished leading while fighting the worst rope drag due to numerous rock ledges and roofs. As you climb, your partner heaves on the rope to take in the slack. The next thing you know your rope looks like a snake trying to shed its skin and you are dangling from what looks like a bundle of white nylon threads.

At some point along the timeline of a climbing rope's life the sheath will get wet, cut, grated, and definitely stretched. This leaves the core of the rope to be exposed or free to make parallel movements inside the sheath.

Many people have been to a climbing gym and seen how the sheath of the ropes are all bunched up at the ends. And some have even seen the result of when the sheath is cut while climbing as illustrated above.

"Sheath slippage" is no joke. It's actually dangerous. And that is why Liberty Mountain and Beal brought a phenomenal game changer to the US market last spring...UNICORE.

UNICORE is the industry leading method of securing the core and sheath of a rope together without changing the rope's performance and durability properties. UNICORE is much like the biological tissue/membrane that keeps the skin attached to the rest of the body.


With a UNICORE rope, climbers won't experience their sheath bunching at the ends and the core will not be overexposed from sheath slippage if the sheath gets cut. That alone will allow any climber to retreat on a rope whose sheath is cut and still be able to pass it through the chains, carabiners, and belay/rappel devices.

In the video below a demonstration is given to show what happens to a weighted rope when the sheath is cut. The first rope does not have UNICORE and the second one does. See the difference.



UNICORE is stretchy, supple, and compatible with Beal's special water and abrasion treatments. This means that the UNICORE technology can be used on both dynamic and static ropes as well as ropes intended for dry and wet condition.

Now you are probably wondering what the big news is that we are so anxious to share, seeing how UNICORE has already been on the market for a hand-ful of months. Well, as of now there are only three ropes that are vested with the honorable UNICORE, e.g., Beal's Diablo, Wall Master, and Wall School ropes. So our big news today is that there will be more...we just can't tell you which ropes yet.

At the Outdoor Retailer Summer Market in August, Liberty Mountain and Beal will reveal the extended collection of ropes that will reign supreme with UNICORE. Keep an eye and ear out for this big announcement and receive it directly by subscribing to our blog and social media pages on Facebook, Google+, and Twitter.
...


Beal qualifies as the worlds’ premier manufacturer of climbing and security ropes. This leading position is explained by indisputable technical advances in the production process, and sales of over 8 million meters of rope annually.

Liberty Mountain is the exclusive U.S. distributor of these French made ropes, making Beal a leading brand that is seen in many, if not most of the outdoor retail shops around the nation. Liberty Mountain also directly sells Beal products to the general consumer through LibertyMountainClimbing.com.


...


5/01/2012

The Diablo Revolution - Beal Ropes



Read about how the Beal's Unicore technology eliminates sheath slippage on both the Diablo 9.8 and 10.2 by clicking here.


7/28/2011

Beal Joker in Urban Climber

The August 2011 issue of Urban Climber has a good review of the Beal Joker.




For more insight on how Beal ropes are made, check out this great video: